FRP translucent ax stone/ FRP translucent rock wall panels

【 Translucent 】 Luminous rock with light, rock wall panel is black. The color of the stone's light transmission is determined by the light behind the wall panel.

【 Size】125.98x47.24 inch (3200x1200mm), Thickness 0.2-0.7 inches（5mm-18mm）, each panel covering 3.84 square meters.

【 FRP & Resin Material 】Fiber reinforced polymer & natural stone powder, 100% Brick Texture Appears Natural Brick Outface. 3D solid, moist-proof, fireproof and sound insulated.

【 Formaldehyde-free is healthier, multi-purpose & Decor 】 Suitable for inside and outside walls of house, such as kitchen, craft projects, bedrooms, study, dining car, RV, balcony and home office, shop decoration etc.

FRP cement pouring board, with innovative technology and excellent performance, brings a new visual and tactile experience to architectural decoration.This unique material perfectly integrates nature and technology, presenting a wonderful effect of realistic texture and natural appearance.Whether it is interior wall decoration, commercial display, or exterior design of public buildings, FRP cement pouring board can bring you a refreshing visual enjoyment.

FRP cement pouring board is a new type of material that combines the advantages of FRP (fiber-reinforced composite materials) and cement.This board has high strength, corrosion resistance, light weight, and easy processing characteristics, and is widely used in construction, decoration, and other fields.

The production process of FRP cement pouring boards includes the construction stage.During construction, a level gauge is required to measure the flatness of the wall, and a tape measure is used to measure the installation position.For flat cement walls, structural adhesive can be directly used for bonding, and after bonding, air nails can be used for fixing.For uneven walls, wood panels can be used for priming, and structural adhesive can be applied to the back of the product for bonding.

In addition, FRP materials have a certain degree of toughness and can be used to make 45° angles.During construction, it is important to note that gypsum boards cannot be used as the base layer for interior walls because the surface of the gypsum board has paper, which can lead to unstable bonding.

In general, FRP cement pouring board is a new material with excellent performance and wide application, and its production process requires attention to relevant construction processes and technical requirements.

Installation Instructions

Preparation tools: toothless saw, structural adhesive, FRP cement decorative plate, level meter, tape measure, repair agent, color paste

Paving process:

1: Check whether the product is damaged after arrival;

2: Cutting: Use a toothless saw/tile cutting saw to cut on the back side to avoid damaging the surface color, etc.;

3: Repair: First fill the gap with a repair agent, then brush the color paste

4: Construction: During construction, use a level gauge to measure the flatness of the wall, and use a tape measure to measure the installation position. A flat cement wall can be directly pasted with structural adhesive, and then fixed with air nails. For uneven walls, use wood panels as a base, and apply structural adhesive to the back of the product for pasting.

5: FRP material has a certain toughness and can be made into a 45° arc.

Construction precautions:

The interior wall cannot use gypsum board as the base layer, as the surface of the gypsum board has a paper surface, resulting in unstable bonding.A repair agent: one kilogram for every three cast boards, and one kilogram for every two other cast boards.

Color paste: 3 meters long gap, with half a kilogram of color paste.

公司簡介

菜單

服務